Large-format starry-sky roof FPCs feature expansive dimensions and thin substrates. Even after passing AOI, electrical testing, and visual inspection at the factory, stacking, handling, and transportation can still cause permanent creases, warpage, contamination, edge damage, and connector deformation. This article outlines proper packaging and incoming inspection practices.
Automotive starry-sky roof FPCs are large in dimension and thin in substrate. After passing AOI, electrical testing, and visual inspection on the production line, improper packaging—such as rolling or folding into standard plastic bags—can still result in permanent creases, warpage, contamination, board-edge damage, and connector deformation upon arrival. Packaging is the final critical step in ensuring manufacturing quality.
Large-format FPCs cannot rely on localized support.
Long or wide-format FPCs tend to sag under their own weight; localized straps and narrow trays create pressure lines. Packaging must use carrier boards or trays of sufficient size and flatness to provide uniform full-board support while restricting in-box sliding and corner impact.
Stacking requires controlled layer count and interlayer isolation.
Coverlay, pads, LED solder joints, stiffeners, and connectors vary in height—direct stacking causes indentation and friction. Clean, non-migrating isolation materials must be used, with defined per-stack quantity and orientation. Irregular branches must not be compressed by adjacent panels.
Interfaces and localized rigid zones require dedicated protection.
Connectors, stiffeners, and拼接 ends (splicing ends) are regions of abrupt stiffness and height change; transport vibration may cause repeated impact. Positioning slots, protective caps, or localized cushioning must be designed—while avoiding compression of dynamic traces and LED locations.
Moisture protection and cleanliness are equally critical.
Select moisture-barrier bags, desiccants, humidity indicator cards, and sealing methods based on material type, SMT status, and storage duration. Dust and ionic contamination must be controlled across packaging areas, gloves, interleaving paper, and carrier boards—avoid moisture-protection materials that may outgas or adhere.
Labeling and incoming inspection:
Labels must include part number, revision, lot number, quantity, orientation, and storage conditions;
Upon opening, first inspect outer carton integrity, carrier board condition, in-box sliding evidence, and pressure marks;
Randomly sample for board flatness, creasing, interface integrity, solder joint condition, and contamination;
Record damage distribution by packaging layer to identify transport-induced stress origins;
Abnormality photos, logistics data, and lot information must be promptly reported to the supplier.
Hongyi Precision can design customized packaging and logistics solutions for automotive starry-sky roof FPCs—tailored to dimensions, branching configurations, connector types, and delivery distance. A starry-sky roof FPC manufacturer’s production capability is reflected not only in producing qualified panels, but also in ensuring those panels remain assembly-ready after warehousing and transportation.